2CG high temperature gear pump

2CG series high temperature gear pump is referred to as 2CG high temperature pump for short. It has good self-priming. There is no need to fill liquid before opening the pump. It has simple and compact structure and convenient use and maintenance.

Structural features of KCG and 2CG high temperature gear pumps:

2CG high temperature gear pump is composed of gear, shaft, pump body, pump cover, shaft end seal and other parts. All parts are made of appropriate temperature resistant materials. The running parts in the pump are lubricated by the medium conveyed.

KCG and 2CG high temperature gear pumps are equipped with safety valves to prevent damage to the pump and motor caused by overload.

2CG high temperature gear pump / high temperature pump is automatically lubricated by the liquid delivered. During daily work, it does not need to add additional lubricating oil and transmit power with elastic coupling, which can compensate for the small deviation caused by installation and play a good buffer role in case of hydraulic impact.

Purpose:

2CG high temperature gear pump / high temperature pump is suitable for conveying at 150 ℃ ~ 300 ℃ and viscosity of 5 × For liquids of 10-6 ~ 1.5 ~ 10-8m2 / S (5-1500cst), the pump is not suitable for conveying liquids with corrosive, more granular particles or fibers, high volatility and low flash point. If there are special needs, a special pump can be made.

Structural features of 2CG gear pump:

1. Gear pump is mainly composed of pump body, pump cover, gear, shaft, bearing, seal and other components.

2. The three bodies of gear pump are cast iron and steel castings

Application range of KCG and 2CG high temperature gear pumps:

KCG and 2CG high-temperature gear pumps are suitable for conveying high-temperature liquid without solid particles and fibers and without corrosiveness. The medium temperature can reach 250 ℃ and the viscosity is 5-1500cst.

Performance parameters of KCG and 2CG high temperature gear pumps: