電話:0317-8301766
傳真:0317-8187701
手機:13931777322
郵箱:hbakby@163.com
網址:www.54hnsh.com
聯系人:候經理
地址:泊頭市104國道西側南倉18號
Thank you for the trust and support of Ike pump industry for many years
電話:0317-8301766
傳真:0317-8187701
手機:13931777322
郵箱:hbakby@163.com
網址:www.54hnsh.com
聯系人:候經理
地址:泊頭市104國道西側南倉18號
Wqcwqcb asphalt insulation pump is a second-generation product of lqb asphalt insulation pump, which is made by our company after years of experience in asphalt insulation pump. This type of insulation pump has more reasonable structure, long service life and stable operation. It is suitable for conveying non corrosive, solid particle free and solidified media at room temperature, such as heavy oil, resin, paraffin wax, asphalt, rubber Rosin and similar liquids, this pump has good self-priming performance.
Structural form of wqcb asphalt insulation pump:
The pump body of wqcb asphalt insulation pump is provided with hollow interlayer and inlet and outlet flanges, which can be used for heating, insulation and cooling the transported liquid and pump by heat transfer oil, steam, hot water and other media.
1. The asphalt insulation pump and motor are connected by elastic coupling and installed on the cast iron chassis.
2. The oil inlet and outlet of asphalt insulation pump and the oil inlet and outlet of heating pipe are connected by standard flange (GB / t9116-2000).
3. The shaft end seal of asphalt insulation pump adopts multistage reflux high temperature resistant packing seal, with reliable sealing performance.
4. Asphalt insulation pump is mainly composed of pump body, insulation interlayer, gear, front and rear covers, shaft end sealing device and other main parts. The pump body, insulation interlayer and other parts in contact with high-temperature medium are made of class II, i.e. cast carbon structure. Gears, bearing sleeves and active and passive shafts are made of high-quality carbon structural steel and have high strength and wear resistance after heat treatment.
Wqcb asphalt insulation pump is divided into three materials according to working temperature:
Class I pump body is made of HT200, gear, shaft and sleeve are made of high-quality carbon steel, and the applicable temperature is within 200 ° C;
Class II pump body is made of carbon steel 45#, gear, shaft and sleeve are made of alloy structural steel, and the applicable temperature is within 300 ° C;
The material of class III pump body is alloy structural steel, and the gear, shaft, sleeve, etc. are made of alloy tool steel. It is suitable for various occasions where the temperature is less than 400 ° C, such as non corrosive, non solid particle heavy oil, asphalt, etc. are solidified at room temperature and insulated in the process of outdoor installation in alpine areas.
Main performance parameters of wqcb asphalt insulation pump:
型號 | 流量 | 工作壓力Mpa | 吸入高度m | 進出口徑mn | 配套電機 | ||
L/mn | M3/h | 功率kw | 型號 | ||||
WQCB2/0.6 | 33.3 | 2 | 0.6 | 3 | ∮25 | 1.5 | Y2-100L-6 |
WQCB3/0.6 | 50 | 3 | 0.6 | 3 | ∮25 | 2.2 | Y2-100L-4 |
WQCB4/0.6 | 66.6 | 4 | 0.6 | 3 | ∮40 | 2.2 | Y2-112M-6 |
WQCB6/0.6 | 100 | 6 | 0.6 | 3 | ∮40 | 4 | Y2-112M-4 |
WQCB8/0.6 | 133 | 8 | 0.6 | 3 | ∮50 | (4)5.5 | Y2-132M-6 |
WQCB12/0.6 | 200 | 12 | 0.6 | 3 | ∮50 | 7.5 | Y2-132M-4 |
WQCB18/0.6 | 300 | 18 | 0.6 | 3 | ∮80 | 7.5 | Y2-160M-6 |
WQCB29/0.6 | 483 | 29 | 0.6 | 3 | ∮80 | 11 | Y2-160M-4 |
WQCB38/0.6 | 633 | 38 | 0.6 | 3 | ∮101 | 15 | Y2-180L-6 |
WQCB58/0.6 | 960 | 58 | 0.6 | 3 | ∮100 | 18.5 | Y2-180M-4 |