3-2rp stainless steel rotor pump

The 3-2rp stainless steel rotor pump, namely the cam rotor pump, is a cam type positive displacement pump that achieves the purpose of conveying fluid by means of the periodic conversion of multiple fixed volume conveying units in the working chamber. The rotor pump of our company has a wide adaptability to viscosity, and has the characteristics of low speed, high efficiency, stable operation, strong self-priming capacity, convenient operation, preheating of the pump, etc.

3-2rp stainless steel rotor pump adopts advanced sealing, reliable performance and long service life. It is a special equipment for conveying high temperature, high viscosity or high sanitary requirements in petrochemical, grease, asphalt, food and light industry.

Characteristics of 3-2rp stainless steel rotor pump:

1. High efficiency and energy saving: small volume, large flow, high head pressure, suitable for long-distance and high resistance quantitative transportation. The impeller of the pump is separated from the transmission gear, and a certain gap is ensured between the spare parts in the pump cavity, which is free from contact, wear, low noise, good reliability, long service life, energy saving and consumption reduction.

2. High viscosity material delivery pump: it is a positive displacement pump. The characteristics of low speed, high output torque and high temperature resistance make the rotor pump play a great role in the field of delivering high viscosity and high temperature materials. Its unique working principle is combined with a powerful drive system. Ensure that the rotor pump can output strong driving torque at low speed, can ensure continuous and non-stop transportation of materials, and can ensure that the material performance will not be damaged during transportation. The viscosity of the medium that can be transported by this pump can be as high as 1000000cp.

3. Rarefied medium delivery pump: the rotor pump also shows great performance advantages when delivering particularly rarefied medium, especially when it is required to output rarefied medium without pulsation. The drive system equipped with the rotor pump can operate at a higher speed when the viscosity of the transmitted medium decreases and the leakage increases. And ensure the constant output flow.

4. Sanitary delivery pump: all parts in contact with materials are made of stainless steel materials in line with sanitary standards, which can meet the use of sanitary and corrosion-resistant occasions in all food, beverage, medicine, chemical and other industries.

5. Water flushing mechanical seal: it can provide a mechanical seal structure with water flushing function, prevent the material from condensing on the end face of the mechanical seal and affecting the normal operation of the equipment in the process of conveying high viscosity materials, and ensure the service life of the mechanical seal in dangerous environment.

6. There are almost no wearing parts: the high viscosity rotor pump does not have any wear of parts (except mechanical seal) during operation. All parts in contact with materials are made of stainless steel. A pair of rotors operate synchronously during operation and maintain a certain gap between them without any contact and any wear in theory, The rotor pump can work in various environments at temperatures up to 220 degrees.

The high viscosity rotor pump also has the following application characteristics:

Long service life; A certain clearance shall be maintained between the two wheels without friction and wear.

Wide range of application: it is an ideal product to replace single screw pump for conveying medium with high viscosity, concentration and particles.

Energy saving products: novel design, low running speed and high efficiency. Compared with screw pump and gear pump, energy saving is less than 30%.

Reliable sealing: due to low speed, the sealing surface is not easy to produce high temperature, little wear and long service life.

Jacketed insulation type: jacketed insulation device can be installed in the pump, and the temperature is suitable for the range of 0 ℃ - 250 ℃.