Aypc magnetic pump

Magnetic drive pump high temperature resistant magnetic drive pump (temperature resistance ≤ 250 ℃) (hereinafter referred to as magnetic pump) is a new product that applies the working principle of permanent magnet coupling to circular arc pump. The main material is stainless steel. With reasonable design and advanced technology, it has the characteristics of full sealing, no leakage and corrosion resistance, and its performance has reached the advanced level of similar products in China.

Ike brand magnetic pump replaces dynamic seal with static seal, so that the overflow parts of the pump are completely sealed, which completely solves the unavoidable disadvantages of running, emitting and dripping of mechanical seals of other pumps. The magnetic pump selects corrosion-resistant and high-strength engineering plastics, steel jade ceramics and stainless steel as manufacturing materials, so it has good corrosion resistance and can prevent the transported medium from pollution.

Scope of use:

The magnetic pump has the advantages of zero leakage, compact structure, beautiful appearance, small volume, low noise, reliable operation and convenient use. It can be widely used in chemical, pharmaceutical, petroleum, electroplating, food, film photography and printing, scientific research institutions, national defense industry and other units to pump acid, alkali liquid, oil, rare and precious liquid, venom and volatile liquid, as well as circulating water equipment and filter. Especially for the pumping of leaky, flammable and explosive liquids, this pump is more ideal.

Installation and use of magnetic drive pump

1. The magnetic pump shall be installed horizontally rather than vertically. For special occasions requiring vertical installation, the motor must be upward.

2. Before starting, open the valve of the suction pipeline. If the suction liquid level is lower than the axis line of the pump, the pipeline shall be equipped with a bottom valve.

3. The pump shall be checked before use. The fan blade of the motor shall rotate flexibly without jamming or abnormal sound, and all fasteners shall be fastened.

4. Check whether the rotation direction of the motor is consistent with the rotation mark of the magnetic pump.

Precautions for use of NYP magnetic drive pump

1. Because the cooling and lubrication of the magnetic pump bearing depends on the conveyed medium, it is absolutely prohibited to idle running, and avoid space-time running caused by restart after power failure in the middle of the work.

2. If the conveyed medium contains solid particles, a filter screen shall be added at the pump inlet; if it contains ferromagnetic particles, a magnetic filter shall be added.

3. The ambient temperature of the pump in use shall be less than 40 ℃, and the temperature rise of the motor shall not exceed 75 ℃.

advantage:

(1) The conveying liquid is stable, without pulsation, small vibration and low noise.

(2) It has strong self-priming performance.

(3) The correct selection of part materials can transport a variety of corrosive media, and the service temperature can be 200 ℃.

(4) The inner and outer rotors have the same steering direction, less wear and long service life.

(5) There is a linear functional relationship between the pump speed and flow, and the pump flow can be changed by appropriately changing the speed.

(6) It is especially suitable for the transportation of high viscosity and consistency media.

Bryc magnetic pump

Bryc heat transfer oil pump overview

Bryc series heat transfer oil pump is designed on the basis of ry. The pump has reasonable structure, excellent performance and reliable use. Suitable for conveying high temperature liquid without solid particles. Its corrosion resistance and service temperature depend on the materials of the main parts in contact with the medium (divided into three categories: 1.ht200; ii.zg230-450; iii.1cr18ni9ti, ocr18ni12-mo2ti)

Application scope of bryc heat transfer oil pump

1. Petroleum and chemical industry

2. Oil industry

3. Synthetic fiber industry

4. Textile printing and dyeing industry

5. Plastics and rubber industry

6. Paper industry

7. Wood industry

8. Construction industry

In addition, bryc series heat transfer oil pump is also widely used in machinery industry, food industry, pharmaceutical production, oil supply circulation system of hot oil furnace and hot oil heating circulation system.

Performance range of bryc heat transfer oil pump (according to design point)

1. Flow 1-500m 3／ h；

2. Lift 10-125m;

3. Temperature - 20 o C- 350oC.

Bryc series heat transfer oil pump has been repeatedly designed and improved by the technical department of our company. Through practical experiments, it is proved that the latest generation bryc series heat transfer oil pump of our company can completely eliminate the leakage of medium under normal use! Especially for media with strong permeability, such as media similar to C9 oil.

Brief introduction of bryc heat transfer oil pump structure

Bryc hot oil pump is a single-stage cantilever structure, which is divided into foot support and center support. The inlet of the pump is axial suction and the outlet is vertical upward. The pump and the drive motor are assembled on the same base through an elastic coupling. The whole unit does not need cooling system.

Bryc series heat transfer oil pump is mainly composed of shell, rotor, bearing, seal and other parts. It adopts packing sealing structure and adds temperature resistant oil seal to play the role of auxiliary seal. The pump and motor are connected by three claw elastic coupling.

Bryc series heat transfer oil pump changes the traditional hot oil pump structure in design, adopts the cooling mode of natural heat dissipation, reduces the volume of the pump, makes the structure simple, saves operation cost, safe and reliable.

Magnetic drive pump high temperature resistant magnetic drive pump (temperature resistance ≤ 250 ℃) (hereinafter referred to as magnetic pump) is a new product that applies the working principle of permanent magnet coupling to circular arc pump. The main material is stainless steel. With reasonable design and advanced technology, it has the characteristics of full sealing, no leakage and corrosion resistance, and its performance has reached the advanced level of similar products in China.

Ike brand magnetic pump replaces dynamic seal with static seal, so that the overflow parts of the pump are completely sealed, which completely solves the unavoidable disadvantages of running, emitting and dripping of mechanical seals of other pumps. The magnetic pump selects corrosion-resistant and high-strength engineering plastics, steel jade ceramics and stainless steel as manufacturing materials, so it has good corrosion resistance and can prevent the transported medium from pollution.

Scope of use:

The magnetic pump has the advantages of zero leakage, compact structure, beautiful appearance, small volume, low noise, reliable operation and convenient use. It can be widely used in chemical, pharmaceutical, petroleum, electroplating, food, film photography and printing, scientific research institutions, national defense industry and other units to pump acid, alkali liquid, oil, rare and precious liquid, venom and volatile liquid, as well as circulating water equipment and filter. Especially for the pumping of leaky, flammable and explosive liquids, this pump is more ideal.